12251 - PAA - A01 Honda Engine Replacement Parts Cylinder Gasket for ACCORD CG6

product presentation

The block and cylinder head are often made of different materials. In order to seal them together, a cylinder head gasket (often called just the “head gasket”) is installed between them.

The head gasket is very flat, and usually made of metal coated in other materials. Most modern engines use a multi-layered steel (MLS) gasket design. The gasket has many holes in it: a large hole for each engine cylinder, and smaller ones for the cylinder head bolts; oil passages; and coolant passages.

Confirming the existence of a head gasket leak usually involves specialized testing by a professional, and can sometimes require disassembly of the engine. A cylinder head gasket can also leak in many different ways, exhibiting many different symptoms. The most common symptoms we see that may indicate a head gasket failure are:

Air bubbling in the radiator, which doesn’t seem to go away no matter how long the system is bled for.
The vehicle violently expells coolant; blowing it out around the radiator cap or coolant reservoir.
The cooling system shows signs of excess pressure build-up, such as a cracked radiator side tank or blown hose.
The engine overheats very quickly, such as within a couple minutes of driving from a cold start.
White smoke from the exhaust.
There is coolant in the engine oil, or engine oil in the coolant

product data

other car

Our company is Yuhuan Henghao Machinery Co., Ltd. Our company specializes in manufacturing passenger car steering ball ends, pull rod assembly, Balance Bar, suspension ball head and some suspension assembly. Our products are mainly applicable to China Chery, Roewe, Geely and Japanese and Korean models; Such as Chery, Roewe, Geely, Toyota, Honda, Nissan, Mitsubishi, Mazda, Isuzu, Hyundai and other models. After more than ten years of steady development and accumulation of experience in technology research and development,

our company has now become the most competitive manufacturer in the field of automobile chassis parts. Adhering to the concept of "high technical standards, strict production management, fine equipment configuration, and diligent staff training" Continuously improve the production quality and level in practice to achieve safer quality and more perfect quality. At the same time, our company absorbs high-quality talents and introduces advanced production equipment to provide customers with the most competitive products and close-up after-sales service with technical support. I hope to work with you for win-win results and draw a blueprint together.