Product introduction

The switch controls the forward and reverse rotation of the internal small motor, drives the rope, and pulls the slider fixed to the glass to slide up and down. The maintenance method of the window glass lift is: 1. Regular cleaning to keep the window clean; 2. When the oil in the lift is exhausted, remove the inner cover and add enough oil; 3. The window gear is sprayed with oil and rubber coated for maintenance. agent. The method of raising and lowering the car glass is: 1. Hold down the switch and release the button when the window is lowered to the desired position; 2. Lift the switch and release the button when the window is raised to the desired position. The car window is an important part of the whole body. According to the installation position of the glass, there are: front and rear windshields, side windows and doors and windows.

Using the principle of series circuit resistance division, there are different resistance value resistors connected inside the switch, and different contacts are connected through the action of the driver's hand. Due to the different resistances, the internal CPU of the J386 module identifies the voltage change on the signal line by monitoring the voltage change. driver action.When the driver presses the switch, after the J386 module recognizes this signal, it sends the lock signal to the rear door module through the LIN line and the CAN bus. After the rear module receives this signal, the rear module will not be in the sub-control. The switch command is controlled. Note: The driver can still control the operation of the rear windows.

Product Description

Other car